1. Asus Rt N12 Password Reset
2. Rt N12 Setup
3. Rt N12 Password Reset Pram

Here you can find the default IP address and the username and password for the user interface of the ASUS RT-N12HP Wireless-N300 3-in-1 router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.

Login data for the user interface

1. Password: Confirm Password: Please input the verifivcation code. Wrong code or expired code, please click resend button.
2. Asus N300 Wi-Fi Repeater RP-N12 Clear all settings, factory reset.

Please wait, Proceeding. Wireless - General: SSID: Hide SSID: Yes No Wireless Mode.

Asus Rt N12 Password Reset

Preconfigured Wi-Fi settings

Rt N12 Setup

Access to the user interface

Accessing the user interface is necessary when you want to change the router configuration. For the ASUS RT-N12HP, you have to do the following steps for access:

1. Switch on router
2. Connect the device via Wi-Fi* or a network cable with the router
3. Open web browser
4. Enter IP address in the address bar and then confirm with ‘Enter’ key
5. Enter username and password in the open interface and confirm once more

* Make sure that your router’s Wi-Fi is activated.

Reset default settings

Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.

Execute hardware reset

To reset the ASUS RT-N12HP to its default settings, you have to do the following steps:

1. Turn on router
2. For at least 6 seconds, press the Reset button
3. Device is automatically restarted
4. Router has been reset to factory settings

Execute software reset

Rt N12 Password Reset Pram

With the ASUS RT-N12HP, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.

After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.